JetPort 5208 Specifications

Overview Specifications Ordering Information Datasheet

8-port Rackmount Serial Server   8 ports RS232 over 10/100M Ethernet Real COM Driver for Windows 2000/XP/2003/Vista, Linux Versatile Serial Services: Real Com, TCP Server Multi-level secure user authentication and authorization by SSH / Telnet or Console Auto IP Discovery, and Virtual Port Mapping Utility User Access by Port Dial-in Modem and Direct Access by PPP/Hyper Terminal Choice of configuration methods: Web console, Console terminal SNMP MIB II, RS-232 MIB for network management, SNMP Trap Event Notification by Syslog, Email and SNMP trap Standard 19-inch rackmount 1U size

Network Interface
Ethernet	10/100BaseTX
Connector	RJ45
Feature	Auto MDI/MDI-X, 10/100M Auto-Negotiation
Protocols	IP, TCP, UDP, ICMP, DHCP, BootP, ARP/RARP, Telnet, SNMP, HTTP, SNTP, SMTP
Serial Interface
Number of Ports	8
Interface	RS-232
Connectors	male DB9
Baud Rate	115.2 bps
Data Bits	5, 6, 7, 8
Parity	odd, even, none
Stop Bits	1, 1.5, 2
RS-232	TxD, RxD, RTS, CTS, DTR, DSR, GND, DCD
Flow Control	XON/XOFF, RTS/CTS
Serial Line Protection	15KV ESD
Features
LED	Power: Startup(Red); Ready(Green) Ethernet : 10M Link(Orange), 100M Link(Green) Serial: Green
Configuration	Windows Utility-JetPort Commander, HTTPS, SSH, Telnet, SNMP, DHCP Client, Device Password, Firmware Upgrade, Save to Flash
Serial Service	Real COM, TCP Server
Reset	Software reload default, Hardware reset button
SNTP	For time management
Access IP Table	16 IP addresses to prevent illegal users
Monitor	Devices’ status, session history
SNMP	RFC1213 MIB II, RFC1317 RS232_like and SNMP Trap
E-Mail Alert	Automatic e-mail warning by pre-defined events
System Log	Trap to Syslog server or local display
System Events	Cold/Warm Start, Login Failed, IP and Password Changed, Access IP Blocked, Serial Port DCD/RI/DSR/CTS changed, Serial Port connected/disconnected
Windows Utility
Utility	Device Discovery, Auto IP, Network Setting, Device and Serial Port Setting and monitoring, Notification setting, Firmware Upgrade, Configuration Backup and Restore, Group Configuration Wizards
Serial Service Mode	Real COM, TCP Server
Advanced Serial Setting	Port-Specific access right, Direct port addressing- via SSH to any Serial Over IP port, Direct Access via serial applications or IP application, VT320 support
Group Configuration Wizard	Group IP Wizard, Group firmware upgrade, Group Backup/ Restore, VCOM and TCP Tunnel Setup Wizard
Power Requirements
System Power	100-240 VAC
Power Line protection	1 KV Burst (EFT), EN61000-4-4 0.5 KV Surge, EN61000-4-5
Mechanical
Dimensions	43.72 x 21.40 x 4.40 cm (1U/19”)
Environmental
Operating Temperature	0 to 50°C
Operating Humidity	5% to 95% (Non-condensing)
Storage Temperature	-20 to 60°C
Warranty	5 years