Korenix -Industrial Ethernet Switch

The member ports of the same trunk group can balance the loading and backup for each other. Port Trunking feature is usually used when you need higher bandwidth for backbone network. This is an inexpensive way for you to transfer a great quantity data. There are some different descriptions for the port trunking.

Different manufacturers may use different descriptions for their products, like Link Aggregation Group (LAG), Link Aggregation Control Protocol, Ethernet Trunk, EtherChanne, etc. Most of the implementations now are conformed to IEEE standard, 802.3ad. The aggregated ports can interconnect to the other switch and also support Port Trunking.

Korenix Supports 2 types of port trunking. One is Static Trunk, the other is 802.3ad, dynamic trunking. When the other end uses 802.3ad LACP, you should assign 802.3ad LACP to the trunk. When the other end uses non-802.3ad, you can use Static Trunk.

JetView

JetView is client/server architecture. Users use the client application to issue the operations and there is a server on the device to do these operations. The major difference between the JetView and other management tools, ex. Web, CLI, and SNMP, is that the JetView can configure several devices at the same time. For example, change IP address or upgrade firmware for over 30 devices at the same time is inconvenient by Web or CLI or SNMP, but it is much easier when using JetView to do these operations. JetView supports auto discovery, group IP settings, group firmware upgrade, and group configuration file backup/restore features. One more important feature is JetView has only one version for various operating systems, ex. Windows 95/98/ME, 2000, XP, and Linux.

Command Line Interface Introduction (CLI)

The Command Line Interface (CLI) is the user interface to the switch's embedded software system. You can view the system information, show the status, configure the switch and receive a response back from the system by keying in a command.

some different command modes. Each command mode has its own access ability, available command lines and uses different command lines to enter and exit. These modes are User EXEC, Privileged EXEC, Global Configuration and (Port/VLAN) Interface Configuration modes.

User EXEC mode:

As long as you login the switch by CLI. You are in the User EXEC mode. You can ping, telnet remote device, and show some basic information.

Privileged EXEC mode:

The system allows you to view current configuration, reset default, reload switch, show system information, save configuration.and enter the global configuration mode.

Global Configuration Mode:

Configure all the features that the system provides you.

VLAN Interface Configuration:

You can configure settings for specific VLAN.

Port Interface Configuration:

Configure port related settings.

Secured Management for Switch

Secured Management by HTTPS and SSH: HTTPS (Hypertext Transfer Protocol over Secure Socket Layer, or HTTP over SSL) is a Web protocol built into browser that encrypts and decrypts user page requests as well as the pages that are returned by the Web server.

Korenix JetNet 5010G supports SSH console. You can remotely connect to the switches by command line interface. The SSH connection can secure all the configuration commands you sent to the switch. SSH is a client/server architecture while JetNet 5010G is the SSH server. When you want to make SSH connection with the switch, you should download the SSH client tool first.

SSH Client

There are many free, sharewares, trials or charged sofwares of SSH clients you can find . Fox example, PuTTY is a free and popular Telnet/SSH client. Note:
PuTTY is copyright 1997-2006 Simon Tatham.

HTTPS

JetNet 5010G provides HTTP Web Interface and Secured HTTPS Web Interface for web management.