JetNet 6059G / 6059G-w Specifications

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3u 100Base-FX Fast Ethernet Fiber
IEEE 802.3ab 1000Base-T
IEEE 802.3z Gigabit Fiber
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1Q VLAN and GVRP
IEEE 802.1QinQ
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE 802.3ad Link Aggregation Protocol (LACP)
IEEE 802.1x Port Based Network Access Protocol
IEEE 1588 Precision Time Protocol (PTP)
Modbus TCP/IP

Store and Forward Technology with 32Gbps Switch Fabric.

26 Mega packets per second, 64 bytes packet size.
14,880 pps for 10Base-T
148,800 pps for 100Base-TX/FX
1488,100 pps for 1000Base-T/ Gigabit fiber
Maximum packet size up to 1632bytes

32 bits ARM-9E running at 180 Mhz and performance up to 200MIPS; Embedded hardware based watch-dog timer

8M bytes flash ROM, 64M bytes SDRAM

64 bytes to 1632 bytes (includes 1522 bytes VLAN Tag)

8K

1M bits shared memory for packet buffer

14,880pps for Ethernet and 148,800 for Fast Ethernet, 1488,100 for Gigabit Ethernet

Embedded board-level thermal detector for main-chip temperature monitoring

Dry Relay output with 1A /30V DC or 0.5A/125V AC ability

One Digital Input with Photo Copular isolation
Digital High: DC 11V~30V
Digital Low: DC 10V~0V

Supports 4 configuration and monitoring interfaces: RS-232 serial port, Telnet, SNMP and Web Browser interface
The RS-232 and Telnet interfaces support Cisco like instructions .

Provides TFTP/Web interface for firmware upgrade and configuration backup, restore

Supports command line interface with Cisco like commands and maximum 4 sessions; the telnet interface also supports SSH

Supports v1, v2c, V3 with SNMP trap function, trap station up to 4 and can be manually configured the trap server IP address

MIBII, Bridge MIB, Ethernet-like MIB, VLAN MIB, IGMP MIB, Korenix Private MIB

Supports JetView and JetView Pro with IEEE 802.1AB Link Layer Discovery Protocol for device finding and link topology discovery

Supports NTP protocol with daylight saving function and localize time sync function

IP address security to prevent unauthorized access

4 receipt E-mail accounts with mail server authentication

Supports both Local or remote Server with authentication

Supports open protocol -Modbus TCP/IP with function code group -4 for factory automation application

Flow control pause frame supports on 10/100/1000Mbps Full Duplex and Back-pressure supports on 1000Mbps Half Duplex only

Port link Speed, Link mode, port status, enable/disable

IEEE 802.3ad LACP with timer and static port trunk; trunk member up to 8 ports and maximum 4 trunk groups include Gigabit Ethernet port

IEEE 802.1Q Tag VLAN with 256 VLAN Entries and provides 2K GVRP entries; 3 VLAN link modes- Trunk, Hybrid and Link access

Direct client ports in isolated/community VLAN to promiscuous port in primary VLAN

Supports Double VLAN Tag function for implementing Metro Network topologies

IEEE 802.1p class of service; per port 4 priority queues

Supports 4 physical queues, weighted run robin queuing (WRR 8:4:2:1) and Strict Priority scheme, which follows 802.1p COS tag and IPv4 ToS/ Diffserv information to prioritize the traffic of your industrial network

IGMP Snooping v1/v2 /v3 for multicast filtering and IGMP Query mode; also support unknown multicasting process forwarding policies- drop, flooding and forward to router port

Ingress filtering for Broadcast, Multicast, Unknown DA or all packets. Egress filtering for all packet types

Online traffic monitoring on multiple selected ports

Port security to assign authorized MAC to specific port

DHCP Client, DHCP Server with IP & MAC Address binding and DHCP agent (option 82)

Port based network access control and also supports user authenticate by the radius account, password and key for the radius server authentication

New generation Korenix Ring Redundancy Technology, Includes Rapid Super Ring, Rapid Dual Homing, TrunkRing^TM, MultiRing^TM and backward compatible with legacy Super Ring^TM; up to 20ms recovery time on fiber port

Multiple uplink paths to one or multiple upper switch

Integrate port aggregate function in ring path to get higher throughput ring architecture

Couple or multiple up to 16 Rapid Super Rings, JetNet 6059G supports up to 4 Gigabit Ring in one Switch

IEEE802.1D-2004 Rapid Spanning Tree Protocol. Compatible with Legacy Spanning Tree and IEEE 802.1w

IEEE802.1s MSTP, each MSTP instance can include one or more VLANs

10/100/1000TX: 9 x RJ-45 Fast Ethernet
Gigabit Fiber: 5 x SFP socket
RS-232 interface: RJ-45 connector
Alarm Relay, Digital Input: 4 pin removable terminal block
Power connector: 4-pin removable terminal block

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568B 100-ohm (100m)
100 Base-TX: 4-pair UTP/STP Cat. 5 cable, EIA/TIA-568B 100-ohm (100m)
1000 Base-T: 4-pair UTP/STP Cat. 5e, 6 cable, EIA/TIA-568B 100-ohm (100m)

Isolated serial interface

10/100/1000 RJ-45 port: Link (Green on) / Activity (Blinking), 1000Mbps (Yellow on)
SFP port: Link (Green on)/Activity (Blinking), 1000Mbps (Yellow on)
System Power: Power on (Green on)
Alarm Relay Output: Relay Activate (Red on)
Digital Input: Signal input ( Green on)/ No signal (Green off)
System Status: System ready (Green on), Indication (Green Blinking)
Ring Status: Green on (Ring normal) / Blinking (Ring with wrong port), Yellow on (Ring abnormal) / Blinking (device's ring port failed)

2 power inputs with redundancy and polarity reverse protection; supports positive /negative power system.
Input voltage: DC24V, range 10.5~60V

24Watts / DC 24V

DIN-Rail or Wall Mounting

Aluminum metal case with IP31 grade protection

95 x 160 x 136 (W x H x D) / with DIN Rail Clip
95 x 160 x 127.2 (W x H xD) / without DIN Rail Clip

1440g without package

-25~70°C (JetNet 6059G)
-40~75°C (JetNet 6059G-w)

0% ~ 95% non-condensing

-40~85°C

AC 1.5KV for all ports and power

Compliance with the EMC standard of Heavy Industrial IEC/EN 61000-6-2, IEC/EN61000-6-4 and FCC Part 15 Subpart B

IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4,
IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8

IEC60068-2-6^Note-1

IEC60068-2-27^Note-2

IEC60068-2-32 with package^Note-3