JetNet 5828G series Specifications

IEEE 802.3 10Base-TX, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z Gigabit Fiber, IEEE 802.3x Flow Control, IEEE 802.1p COS, IEEE 802.1Q VLAN, IEEE 802.1QinQ, IEEE 802.1D-2004 RSTP, IEEE 802.1s MSTP, IEEE802.3ad LACP, IEEE802.1X, IEEE802.1AB LLDP, IEEE 1588v1 PTP

RFC791 IP, RFC768 UDP, RFC 793 TCP, RFC 783 TFTP, RFC 854-859 TELNET, RFC 1157 SNMP, RFC 1213 MIBII, RFC 1215 Traps, RFC 1493 Bridge MIB, RFC 1757 RMON, RFC 1866 HTML, RFC 2068 HTTP, RFC1112 IGMP V1, RFC2236 IGMP V2, RFC1058 RIPv1, RFC1723/2453 RIPv2, RFC1583 OSPF, RFC2328 OSPFv2

Store and Forward Technology, 12.8Gbps Switch Fabric

14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100 pps for Gigabit Ethernet

Typical: 64 bytes to 1536 bytes

Up to 9,216bytes

16K MAC

32Mbits

Dry Relay output with 1A@24V ability

Cisco-Like CLI, JetView, Web, HTTPS, SSH, Backup/Restore, DHCP Client, Warm reboot, Reset to default, Admin password, MAC address table display, Static MAC, Aging time, Traceroute

Port Enable/Disable, Flow Control, Speed/Duplex, Status and Port Statistic

Static Trunk and 802.3ad LACP, Up to 6 Trunk Group, 8 ports per trunk

IEEE 802.3ad Link Aggregation Control Protocol, Short/Long LACP Timeout

Online traffic monitoring on multiple selected ports

Enable/Disable with Adjustable MTU size

SNMP v1, v2c, v3 and Traps.

MIB-II, Ethernet-like, P-Bridge, Q-Bridge,Bridge, RSTP, RMON Group 1,2,3,9 and Private MIB

Link Layer Discovery Protocol to advertise system/port identity and capability on the local network

Industrial Communication protocol for monitoring

IEEE802.1Q VLAN, GVRP. Up to 256 Tag VLAN, 4K Configurable VLAN ID

Direct client ports in isolated/community VLAN to promiscuous port in Primary VLAN

Double VLAN Tag in an Ethernet frame

8 physical priority queues per port, IEEE802.1p COS and Layer 3 TOS/DiffServ

IGMP Snooping V1/V2/V3 for multicast filtering and IGMP Query, up to 256 Multicast Groups

GARP Multicast Registration Protocol

Ingress filtering for Broadcast, Multicast, Unknown DA or All packets, step by 64kbps

Synchronize time from the PTP server

Network Time Protocol to synchronize time from Internet

Embedded hardware watchdog timer to auto reset system when switch system failure

Port_based Network Access Control

Login by Radius account/password, Key for Radius Server Authentication

Deny/Permit ACL Security policy for specific IP/MAC address and TCP/UDP port

Can assign 255 IP address, support IP and MAC binding

Relay DHCP Request to different IP subnet

Automatic warning by pre-defined events

Supports both Local mode and Server mode

Power and Ports Failure, DI state, DO state, Ping Failure, Login Fail, Time Synchronize Fail, Super Ring Topology Change

IEEE802.1s MSTP, each MSTP instance can include one or more VLANs.

IEEE802.1D-2004 Rapid Spanning Tree Protocol, compatible with Legacy STP and IEEE802.1w

New generation Korenix Ring Redundancy Technology, Includes Rapid Super Ring, Rapid Dual Homing, TrunkRing, MultiRing and backward compatible with legacy Super Ring

Multiple uplink paths to one upper switch or multiple upper switch

Integrate port aggregate function in ring path to get higher throughput ring architecture

Couple or multiple up to 12 100M rings and 2 Gigabit Rings in a single switch

Backward compatible in client mode

Supports Default, Static and Dynamic Route

More than one IP on a network interface

Incorporates both 802.1Q bridging and Routing function

Hop-based IP routing protocol, supports RIPv1 and RIPv2

The multicast group management protocol, support IGMP v1,v2

Multicast Routing among the local IP interfaces

Hop-based multicast routing protocol, short of Distance Vector Multicast Routing Protocol (Available Soon!)

Multicast routing protocol, short of Protocol Independent Multicast -Dense Mode (Available soon!))

Short of the Virtual Router Redundancy Protocol. Automatically backup routing route to specific router

Link state based IP routing protocol, supports OSPFv1 and OSPFv2

10/100/1000Base-TX: 4 x RJ-45, combo with SFP
1000Base-X: 4 x SFP with Hot Swappable, DDM (Digital Diagnostic Monitoring) SFP supported

AC/HDC Power 1/2(Green), LDC Power 1/2 (Green), RDY(Ready) (Green), Digital Input 1/2(Green), Ring Master (Green), Digital Output 1/2(Red), Ring Fail (Red)
Gigabit Copper/SFP (Port 25-28): Link/Activity (Green/ Green Blinking)

PWR 1/2 (Green); DO 1(Red); R.S. (Green: Ring state is normal; Green Flashing: Incorrect configuration;
Amber: Ring state is abnormal; Amber Flashing: One of the ring ports break has been detected.)
Port 1-28: Link/Activity (Green/Green Blinking)

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable (100m)
100 Base-TX: 2/4-pair UTP/STP Cat. 5 cable (100m)
1000 Base-T: 4-pair UTP/STP Cat. 5 cable (100m)

Easy to power off the switch when exchanging the module(JetNet 5828G)

DB9 Connector, Pin3: TxD, Pin2: RxD, Pin5:GND

2 sets of Digital Input (JetNet 5828G)
Logic Low (0): 0-10VDC/Logic High(1): 11-30VDC

1/2 sets (JetNet 5628G/5828G) of Dry Relay outputs with 1A@24V for configurable events

JNM5-8TX
Number of Ports in Modules: 8 x 10/100Base-TX, Auto MDI/MDI-X, Auto Negotiation
JNM5-4TX/4SFP
Number of Ports in Modules: 4 x 10/100Base-TX, Auto MDI/MDI-X, Auto Negotiation
SFP: 4 x 100M Base-FX SFP Socket
JNM5-2SFP/4MSC:
Number of Ports in Modules: 2 x 100Base-FX SFP plus 4 x 100Base-FX Multi mode SC Transceiver
SFP: 2 x 100M Base-FX SFP Socket
100Base-FX Multi Mode SC Transceiver
Multi-mode SC duplex connector
Central Wavelength: 1310 nm
Output Optical Power:
62.5/125 um fiber: -20 ~ -14 dBm
50/125 um fiber: -23.5 ~ -14 dBm
Minimum Input Optical Power (Sensitivity): -31 dBm
Single power supply: 3.3V
Power Consumption: Per Port max. 1.6 Watt (4V*400mA)
Typical Distance: 2KM
JNM5-2SFP/4SSC
Number of Ports in Modules: 2 x 100Base-FX SFP plus 4 x 100Base-FX Single mode SC Transceiver
SFP: 2 x 100M Base-FX, LC Type
100Base-FX Single Mode SC Transceiver (30KM)
Single-Mode SC duplex connector
Central Wavelength: 1310 nm
Output Optical Power:
9/125 um fiber: -15 ~ -8 dBm
Minimum Input Optical Power (Sensitivity): -34 dBm
Single power supply: 3.3V
Power Consumption: Per port max. 1.6 Watt (4V*400mA)
Typical Distance: 30KM

Port ID of Slot 1 start from port 1 to 8, slot 2 start from port 9 to 16, slot 3 start from port 17 to 24

Link/Activity of connected port (Green/Green Blinking)

AC: 85-264VAC
HDC (High Voltage DC Input): 88-370VDC
LDC (Low Voltage DC input): 24/48VDC (5828G only)

Max. 50 Watts by modules

JetNet 5828G: 1 x Standard 3-pronged AC plug +4 pin LDC Terminal Block
JetNet 5828G-2AC: 2 x Standard 3-pronged AC plug
JetNet 5828G-R: 1 x 6 pin HDC Terminal Block

19-inch, 1U Rack Mount, Ethernet Ports on the Front (JetNet 5828G/5828G-2AC)
19-inch, 1U Rack Mount, Ethernet Ports on the Rear (JetNet 5828G-R)

Exchangeable after powering off the switch

Metal case

44mm(H) x 431mm (W) x 375mm (D)

7 kg with package

Dry Heat: 85^oC, 16hrs
Cold: -40^oC, 16hrs; Cold Start requires 100VAC
Damp Heat: 50^oC, 95% Humidity (non-condensing), 4 Cyclic, 96hrs
Above tests follows IEC 61850-3 clause 5.2&5.3, IEC 60870-2-2 and IEEE 1613 clause 4.1
Korenix Stress Test: -40 ~70^oC with 95% Humidity, 3 Cyclic, 51hrs

-40 to 85 °C

5% ~ 95%

1.5KV for AC power and Port

IEC 61850-3 and IEEE 1613 rated

NEMA TS-2 rated

EN50121-4 rated

FCC Class A, CE/EN55022. Class A

IEC 61000-4-2(ESD),
IEC 61000-4-3(RS),
IEC 61000-4-4(EFT),
IEC 61000-4-5(Surge),
IEC 61000-4-6(CS),
IEC 61000-4-8(RF Magnetic),
IEC 61000-4-9 (Pulsed magnetic field)
EN61000-10(Damped oscillator),
EN61000-4-11(Voltage Dips),
EN61000-4-16(Conducted command disturbances),
EN61000-4-17(Ripper on DC power),
EN61000-4-18(Damped oscillatory wave),
EN61000-4-29(Voltage Dips)
IEEE cl.5.3 Voltage Dip, IEEE 1613 cl.6.3 Impulse Voltage,
IEEE 1613 cl.6.2 High Voltage Test

IEC 61850-3 clause 5.5, IEC 60870-2-2 table 3

IEC 61850-3 clause 5.5, IEC 60870-2-2 table 3

IEC 61850-3 clause 5.5, IEC 60870-2-2 table 3

Above 200,000 Hours, MIL-HDBK-217F GB standard