JetNet 5710G Specifications

IEEE 802.3 10 Base-T Ethernet
IEEE 802.3u 100 Base-TX Fast Ethernet
IEEE 802.3ab 1000 Base-T
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at LLDP Power over Ethernet plus
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1Q VLAN and GVRP
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE802.3ad Link Aggregation Protocol (LACP)
IEEE802.1x Port Based Network Access Protocol

Store and Forward Technology with 32Gbps Switch Fabric.

14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit Ethernet

32 bits ARM-9E running at 180 Mhz and performance up to 200MIPS; Embedded hardware based watch-dog timer.

8M bytes flash ROM, 64M bytes SDRAM.

64 bytes to 1522 bytes (includes double VLAN tag).

8K MAC address table.

1M bits shared memory for packet buffer.

14,880pps for Ethernet and 148,800pps for Fast Ethernet, 1488,100pps for Gigabit Ethernet

Dry Relay output for port event or PoE event.

Telnet, local RS-232 console, Web- browser interface, SNMP, Trap and SMTP interface.
Cisco-Like CLI, Telnet, Web, TFTP/Web Update for firmware and configuration backup and restore, DHCP Client, warm start, factory default, Admin password, Port Speed/Duplex Control, status, statistic, MAC address table display, static MAC, Aging time, SNMP v1, v2c, v3, Traps and RMON groups 1,2,3,9.

Supports command line interface with Cisco like commands and maximum 4 sessions; the telnet interface also supports SSH.

v1, v2c, V3 with SNMP trap function, up to 4 trap stations and manual configuration of the trap server IP address.

MIBII, Bridge MIB, Ethernet-like MIB, VLAN MIB, IGMP MIB, Korenix Private MIB.

Supports JetView and JetView Pro with IEEE 802.1AB Link Layer Discovery Protocol for device and link auto-topology discovery.

Supports NTP protocol with daylight saving function and localized time sync function.

IP address security to prevent unauthorized access

4 receipt E-mail accounts with mail server authentication

Supports both Local or remote Server with authentication

Port link Speed, Link mode, current status and enable/disable.

IEEE 802.3ad port aggregation and static port trunk; trunk member up to 6 ports and maximum 4 trunk groups, including Gigabit Ethernet port.

IEEE 802.1Q VLAN with GVRP. 256 VLAN groups, VLAN ID from 1 to 4094, Private VLAN
Supports Trunk, Hybrid and Link access modes.

IEEE 802.1p class of service; per port 4 priority queues.

Supports 4 physical queues, weighted fair queuing (WRR) and Strict Priority scheme, which follows 802.1p COS tag and IPv4 ToS/ Diffserv information to prioritize the traffic of your industrial network.

IGMP Snooping v1/v2c /v3 for multicast filtering and IGMP Query mode; also supports unknown multicasting process forwarding policies- drop, flooding and forward to router port.

Ingress/Egress filtering for Broadcast, Multicast, Unknown DA or All packets.

Online traffic monitoring on multiple selected ports

Port security to assign authorized MAC to specific port

DHCP Client, DHCP Server with IP & MAC Address binding and DHCP Relay (option 82).

Port based network access control and user authentication by radius account, password and key for the radius server authentication

IEEE 802.3af Power over Ethernet , IEEE 802.3at Power over Ethernet plus

End-span wiring architecture.

IEEE 802.3af /at Auto Mode: Automatically detects power consumption level by Classification ID and controls high power by IEEE 802.3at LLDP protocol (note-1).
Forced Mode: Forced PoE powering with Power limiting protection.

RJ-45: V+ (3,6), V- (1,2)

IEEE 802.3af: 15.4W x8 / 70^oC
IEEE 802.3at: 30W x8 / 60^oC

system will auto calculate total power and shut down low priority port when drawing current is over the power supply

New generation Korenix Ring Redundancy Technology, Includes Rapid Super Ring (RSR^TM), Rapid Dual Homing (RDH^TM), TrunkRing^TM, MultiRing^TM and backward compatible with legacy Super Ring^TM.

Multiple uplink paths to one or multiple upper switch

Integrates port aggregation function in ring path to get higher throughput ring architecture

Couple or multiple up to 16 Rapid Super Rings

IEEE802.1D-2004 Rapid Spanning Tree Protocol. Compatible with Legacy Spanning Tree and IEEE 802.1w. The RSTP function can be also deployed on the RSR ring port to deliver more redundancy

10/100 TX port: 8 –port RJ-45 with 4 PSE inject function
Gigabit port : 2-port RJ-45
Console port : RJ-45 type RS-232 interface
Power & Alarm Relay port: 6-pin removable terminal block connector and 1embedded alarm relay output

100 Base-TX: 4-pair UTP/STP Cat.5e/Cat.6 cable, EIA/TIA-568B 100-ohm (100m)
1000 Base-T: 4-pair UTP/STP Cat.5e/Cat.6 cable, EIA/TIA-568B 100-ohm (100m)

RS-232: TxD (Pin 1), RxD (Pin2), Signal Ground (Pin5)
Alarm output: located on terminal block

10/100 RJ-45: Link (Green on) / Activity (Green Blinking), Full duplex (Yellow on) / Collision (Yellow Blinking)
Gigabit Copper: Link (Green on) / Activity (Green Blinking)
PoE port: IEEE 802.3af (Green on: Power forwarding; Blinking: PoE Abnormal ) / IEEE 802.3at (Blue on: Power forwarding; Blinking:PoE Abnormal)
Power: System Power ready (Green on)
Sys: System Ready (Green On)
Alm: Alarm Relay Active (Red On)
Ring Status.: Green on (Ring normal) / Blinking (Wrong ring port), Amber on (Ring abnormal) / Blinking (device's ring port failed)

6-pin removable terminal block

Dry Alarm Relay output integrated in 6-pin terminal block
Alarm Relay activated once pre-configured event occurred. (1A/ DC 30V)

Input Voltage: DC 48~57V, redundant input with reverse protection

15 watts @ DC48V without PD loading.

Wall Mount

Steel Metal case

185 (W) x 145 (H) x 63.8 (D) w/o mounting kit
296.5 (W) x 145 (H) x 63.8 (D) w/mounting kit

1.25kg

-40 ~ 70°C: 30W PD loading x8 ports

0% ~ 95% , non-condensing

-40 ~ 85 °C

AC 1.5KV for all ports and power

CE/EN 61000-6-4, CISPR-16-1-2: 2003, CISPR-16-2-1: 2003, CISPR-16-2-3: 2006, CISPR-22: 2005+A1: 2005 (9.6), FCC Part15B Class A

CE/EN 61000-6-2: 2005, IEC 61000-4-2: 2008, IEC 61000-4-3: 2006+A1:2007, IEC 61000-4-4: 2004, IEC 61000-4-5: 2005, IEC 61000-4-6: 2008, IEC 61000-4-8: 1993+A1: 2000