JetNet 5010G / 5010G-w Specifications

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T
IEEE 802.3z Gigabit Ethernet Fiber
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN and GVRP
IEEE 802.1QinQ
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE802.3ad LACP
IEEE802.1X Port_based Network Access Control
IEEE802.1AB Link Layer Discovery Protocol
Modbus TCP/IP

Store and Forward Technology with 32Gbps Switch Fabric.

14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit Ethernet

64 bytes to 1522 bytes (with VLAN Tag)

8K MAC

1Mbits

Dry Relay output with 1A@24V ability

Cisco-Like CLI, JetView, Web, HTTPS, SSH; TFTP/Web Update for firmware and configuration backup/restore, DHCP Client, Warm reboot, Reset to default, Admin password, Port Speed/Duplex control, status, statistic, MAC address table display, Static MAC, Aging time.

SNMP v1, v2c, v3, Traps and RMON1

MIB-II, Bridge MIB, VLAN MIB, SNMP MIB, RMON and Private MIB

Up to 5 Static Trunk and 802.3ad LACP

IEEE802.1Q VLAN, GVRP. Up to 64 VLAN groups

Direct client ports in isolated/community VLAN to promiscuous port in primary VLAN

Double VLAN Tag in an Ethernet frame

Four priority queues per port,
IEEE802.1p COS and Layer 3 TOS/DiffServ

IGMP Snooping V1/V2/V3 for multicast filtering and IGMP Query V1/V2

Ingress filtering for Broadcast, Multicast, Unknown DA or All packets, and Egress filtering for All packets

Network Time Protocol to synchronize time from Internet or local PC

Embedded hardware watchdog timer to auto reset system when switch system failure

Online traffic monitoring on multiple selected ports

Assign authorized MAC to specific port

IP security to prevent unauthorized access

Port_based Network Access Control

Login by Radius account/password, Key for Radius Server Authentication

Can assign 255 IP address, support IP and MAC binding

Relay the DHCP request

Automatic warning by pre-defined events

Supports both Local mode and Server mode

Supports open protocol- Modbus TCP/IP with function code group 4 for factory automation application.

IEEE802.1s MSTP, each MSTP instance can include one or more VLANs

IEEE802.1D-2004 Rapid Spanning Tree Protocol. Compatible with Legacy STP and IEEE802.1w.

2nd generation Korenix Ring Redundancy Technology. Failure recovery within 5ms.

Multiple uplink paths to upper switches

Couple or multiple Rapid Super Rings

Backward compatible in client mode

10/100TX: 7 x RJ-45, Auto MDI/MDI-X, Auto Negotiation
10/100/1000TX: 3 x RJ-45, combo with SFP
Gigabit Fiber/100Base-FX: 3 x SFP with Hot Swappable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable (100m)
100 Base-TX: 2/4-pair UTP/STP Cat. 5 cable (100m)
1000 Base-T: 4-pair UTP/STP Cat. 5 cable (100m)

10/100 RJ-45: Link/Activity(Green), Full duplex/Collision(Yellow)
Gigabit Copper/SFP: Link/Activity(Green)
Unit: Power(Green), Digital Out(Red), Digital Input(Green), R.M.(Green)

RJ-45 Connector, Pin3: TxD, Pin6: RxD, Pin5: GND

2 sets of power Inputs

2 sets of Digital Input
Logic Low (0): 0-10VDC/Logic High(1): 11-30VDC

2 sets of Relay outputs for pre-defined events

Reset button is provided to restore default settings

12~48V/-12~-48VDC with Reverse Polarity Protection

11.5 Watts @ DC 48V

DIN-Rail mount or Wall Mount

IP-31 protection, aluminum metal case

137mm(H) x 96mm (W) x 119mm (D)

0.915kg with package

-25 ~ 70°C (JetNet 5010G), -40 ~ 70°C (JetNet 5010G-w)

0% ~ 95% (Non-condensing)

-40 ~ 85°C

1.2KV for power
1KV for ports

EN55022 CLASS A, EN61000-3-2, EN61000-3-3, EN61000-6-4

EN55024, EN61000-6-2, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-6-2

UL 508

IEC 60068-2-27

IEC 60068-2-32

IEC 60068-2-6