JetNet 5010G / 5010G-w Overview
Industrial 7+3G Gigabit Managed Ethernet Switch
- 7 10/100Base-TX and 3 Gigabit RJ-45/SFP combo ports (10 / 100 / 1000 Base-T, 100 Base-FX, 1000 Base-X)
- SFP ports support 100/1000 Fiber with Digital Diagnostic Monitoring (DDM) to monitor long distance fiber quality
- 32Gbps Non-Blocking, switch backplane 8K MAC address table
- IEEE 802.1s MSTP, RSTP and Multiple Super Ring (Rapid Super Ring, Dual Homing, MultiRing, TrunkRing) for network redundancy
- Advanced management by 256 VLAN, Private VLAN, QinQ, GVRP, QoS, IGMP Snooping V1/V2/V3, Rate Control, Port Trunking, LACP, Online Multi-Port Mirroring
- VLAN, Private VLAN, QinQ, GVRP, QoS, IGMP Snooping V1/V2/V3, Rate Control, Port Trunking, LACP, Online Multi-Port Mirroring
- Supports LLDP and JetViewPro i2NMS software for auto-topology visualization and efficient group management
- Supports Modbus TCP/IP for Factory Automation
- Supports console CLI , Web, SNMP V1/V2c/V3, RMON, HTTPS, SSH for remote management
- Advanced security feature supports IP Security, Port Security, DHCP Server, IP and MAC Binding, 802.1x network access control
- Event Notification by E-mail, SNMP trap, Syslog, Digital Input and Relay Output
- Dual 10.5-60VDC power inputs
- IP31 rugged aluminum case
- -25~70°C (JetNet 5010G), -40~75°C (JetNet 5010G-w) operating temperature
|Coal Mine Monitoring System
|Gas Distribution Station
The JetNet 5010G is a Managed Industrial Ethernet Switch, equipped with 7 ports 10/100TX and 3 ports 10/100/1000 RJ-45/100-FX/Gigabit SX/LX combo ports. The 2 gigabit ports are used to form the nonstop Rapid Super Ring. The 3rd gigabit port is used to connect to upper switch, to couple ring or public server. The gigabit combo port design gives the flexibility to choose copper or fiber media, 100Base-FX or 1000Base-X, multi-mode or Single-Mode for different distance application,need of without stocking different switch models.
The JetNet 5010G is designed as rugged surface in aluminum material with curvilineal heating dispersing mechanical design and wide operating temperature. The embedded software supports full Layer 2 management features, MSTP, RSTP, multiform ring redundancy, network control, monitor, security and notification. The JetNet 5010G also provides builtin watchdog timer, digital input and relay output to avoid undetected damage. With JetNet 5010G you can fulfill
the dream of having the perfect solution to construct your industrial Ethernet infrastructure.
3rd Gigabit Uplink for Flexible Network Planning
JetNet 5010G offers three Gigabit RJ-45/SFP combos which improve the performance dramatically compared to typical two Gigabit RJ-45/SFP combos. Each combo comes with flexible connectivity, 100Mbps Single-Mode/Multi-Mode or 1000Mbps Single-Mode/Multi-Mode, as well as a copper connection. Now, end-users can achieve as many as 10 different combinations of port connections. Also, by selecting a suitable range of fiber transceivers, the JetNet5010G can fulfill your industrial applications at long distances.
100 / 1000Mbps DDM Transceiver for High Quality Monitoring
The JetNet 5010G SFP socket supports 100Base-FX Single/Multi-Mode and 1000Base-SX/LX/LHX/XD Multi/Single-Mode transceiver. Moreover, it supports DDM (Digital Diagnostic Monitoring) type SFP transceivers allowing users to diagnose optical cable transmission problem through maintenance and debugging of the optical signal quality by DDM without the need of an extra optical cable analyzer as a result greatly saving time and system costs.
Comprehensive Redundant Solutions — Multiple Super Ring (MSRTM)
The JetNet 5010G supports MSRTM (Multiple Super
Ring); the new generation of RSR (Rapid Super Ring)
technology. This new technology includes various new
features for different network redundancy applications
and structures. The JetNet 5010G allous aggregating up
to 5 rings, including 4 Fast Ethernet and 1 Gigabit ring.
With the MSRTM technology, a node can be configured
to multiple rings with the failover time in as little as 5ms
and ZERO-second of restore time. In addition, users can
extend the ring topology by adding hundreds of JetNet
5010G to meet the network needs without compromising
the speed of the network.
The MSRTM also facilitates the JetNet 5010G to
connect with core management switch via standard
Rapid Spanning Tree Protocol or through multiple
paths or nodes to increase the reliability of the Rapid
Dual Homing (RDHTM) Technology. By integrating
MSRTM and Link Aggregation Control Protocol (LACP),
the JetNet 5010G can enhance the link availability
and increase the link capacity. Two or more Fast
Ethernet connection are bundled in order to increase
the bandwidth and to create resilient and redundant
Symmetric TrunkRingTM Asymmetric TrunkRingTM
TrunkRingTM is a new feature in MSRTM which merges the two technologies of RSR and link aggregation. It takes advantage of aggregation to enhance the link redundancy, while increasing the link speed. The ring will open only if all the aggregated links are broken. Link aggregation can be achieved by either, static trunk or LACP protocol. Not all the link sections in a TrunkRingTM need to be the same. Ring links can be either symmetric or asymmetric. Some are a single link, and the others are aggregated by links where the number of links in a trunk group can be different. Users can enhance the link redundancy at different locations in accordance to the need. The link with less speed is more likely to be used as the backup path for restoring the network to full play capacity.
MultiRingTM provides easier connectivity between two ring networks. The simplest example is to connect two rings by a single device. Depending on the number of ports, a device can even gather multiple rings together. As shown in the figure, MultiRingTM technology simply extends the network topology by linking multiple rings into a line or into multiple JetNet 5010G Simply connect 2 rings by a device directions. In addition to extensibility, MultiRingTM has great diversity of various ring technologies. With MultiRingTM enabled, a device can connect RSRTM rings, TrunkRingTM and a ring of Super Ring together. Which provides extensibility to new technologies while keeping the great backward compatibility.
Rapid Dual Homing (RDHTM) Technology
Rapid Dual Homing (RDHTM) replaces DualHoming II and can be used for ring coupling. While keeping easy configuration and multiple redundancies, the failover time is much faster (less than 50 ms) and the restore time is ZERO (seamless restoration). Uplinks can be auto detected and gathered into groups. In each group, uplinks are sorted into Primary, Secondary, and Standbys by their link speed. The uplink with the highest speed is more likely to be the active path for data transmission. Link aggregation is also integrated into RDHTM. An uplink can be a link or several links aggregated as a trunk, which provides better redundancy and link capacity.
Various Network Control and Security Features
The JetNet 5010G provides various network control and security features. The Network Control feature allows users to optimize their industrial environment. The supported features include VLAN, Private VLAN, QinQ, IGMP Snooping, Quality of Service (QoS), Link Aggregation Control Protocol (LACP), Rate Control. The security also helps users to avoid hackers’ attack. The features included are, DHCP Server, IP and MAC Binding, 802.1x Access Control, SSH, IP Access Table and Port Security.
Port Security is an enhanced security feature provided by JetNet 5010G. Port Security is also known as, “Port and MAC Binding”. Users can bind a specific MAC address to a specific port, add the MAC and Port binding entry/entries to the port security table. After enabling this, only the PC with the available MAC address can access the network through the switch. The other PCs can’t even pass the traffic through the port.
A Built-in Watchdog Timer
With a Built-In Watchdog Timer, the JetNet 5010G performs a warm boot (restarting the switch) automatically when the switch system locks up. It saves the effort of maintenance for keeping network alive if the switch can recover by itself.
Robust Mechanical Design
Korenix JetNet 5010G's outstanding outlook is rock solid with strong functionality. Using aluminum extrusion case with IP 31 class protection, light weight, rigid shell and excellent thermal conductivity units, it can operate reliably under harsh industrial environments.
Link Aggregation Control Protocol
Link Aggregation Control Protocol (LACP) allows you to group multiple Ethernet ports in parallel to increase the link bandwidth. The aggregated ports can be considered as one physical port, so that the bandwidth is higher than just one single Ethernet port. The member ports of the same trunk group can balance the loading and backup with each other. The LACP feature is usually used when you need higher bandwidth for the backbone network. This is an inexpensive way for users to transfer much more data. If the trunk port is also assigned as a ring port, it will become as a TrunkRingTM, which means, that the bandwidth of ring path has increased with port trunk technology. Now, there is no recovery time when failures occur. The JetNet 5010G provides a simple and easy way to aggregate port bandwidth into Rapid Super Ring.
LLDP and JetView Pro i2NMS for Auto Topology Visualization
The Link Layer Discovery Protocol (LLDP) was formally ratified as IEEE 802.1AB-2005. LLDP is the Layer 2 protocol that allows the network device/station to advertise connectivity & management information, the identity & major capabilities. If receives and establishes network management information on the local same network. In industrial environments, most vendors provide their own discovering protocols, window utility or other tools to manage their switches.
The LLDP protocol fixes the interoperability among them. With LLDP supported, users can easily browse the network devices and establish the network management information schema about the stations. With SNMP, LLDP and JetView protocols supported, JetNet 5010G series can be easily discovered, their port and ring status can be displayed by JetView Pro, the Korenix designed Network Management System or other NMS, which supports SNMP and LLDP. The software can help administrators effi ciently and effectively manage the industrial network.
Easy-to-Configure Network Management Features
The JetNet 5010G also provides users many advanced management features. It can be configured smartly by JetView, JetView Pro, Web browser, SNMP, Telnet and RS-232 console Command Line Interface (CLI). It provides Failure notification by E-mail, SNMP Trap, System Log, Digital Input and Fault Relay. The JetNet 5010G also supports Built-In Watchdog Timer for system recovering when detecting CPU failure.
Modbus TCP/IP for Factory Automation Network Enhancement
The Modbus TCP/IP protocol is supported in JetNet 5010G series for factory automation applications. It enables administrator to connect to data acquisition (SCADA) system and read the switch's operating information using its own Modbus TCP/IP master program for monitoring and maintaining switch’s status.
With the supported Modbus TCP/IP, the JetNet 5010G series become an element of factory automation such as the Programmable Logic Controller (PLC), Distributed Control System (DCS), and allow users to monitor/maintain factory equipment on the HMI (Human Machine Interface) system, including production information and communication status. Therefore, user does not need to integrate multiple management platforms to monitor factory equipment: with just a single JetNet 5010G platform users can easily achieve enhanced monitoring and maintenance of the entire factory.
JetNet 5010G Appearance
Dimensions (Unit -mm)