JetNet 5008G-P Specifications

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-TX
IEEE 802.3z Gigabit Ethernet Fiber
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1p class of service
IEEE 802.1Q VLAN and GVRP
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE802.3ad LACP
IEEE802.1X Port_based Network Access Control

Store and Forward Technology with 32Gbps Switch Fabric

14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit Ethernet

64 bytes to 1522 bytes (with VLAN Tag)

8K MAC

1Mbits

14,880pps for Ethernet and 148,800 for
Fast Ethernet and transfer packet size from 64 to 1522Bytes.

Cisco-Like CLI, Telnet, Web, TFTP/Web Update for firmware and configuration backup and restore, DHCP Client, warm reboot, reset to default, Admin password, Port Speed/Duplex Control, status, statistic, MAC address table display, static MAC, Aging time, SNMP v1, v2c, v3, Traps and RMON1

MIBII, Bridge MIB, VLAN MIB, SNMP MIB, RMON and Private MIB

Up to 5 Static Trunk and 802.3ad LACP

802.1Q VLAN, GVRP. Up to 64 VLAN groups

Four priority queues per port, 802.1p COS and Layer 3 TOS/DiffServ

IGMP Snooping V1/V2/V3 for multicast filtering and IGMP Query V1/V2

Ingress filtering for Broadcast, Multicast, Unknown DA or All packets and filtering for All packets.

Network Time Protocol to synchronize time from internet

Embedded hardware watchdog timer to auto reset system when failure

Online traffic monitoring on multiple selected ports

Port security to assign authorized MAC to specific port

IP security to prevent unauthorized access

Port_based Network Access Control

Can assign 255 IP address, support IP and MAC binding

SMTP warning by pre-defined events

Supports both Local mode and Server mode

IEEE802.1D-2004 Rapid Spanning Tree Protocol. Compatible with Legacy STP and IEEE802.1w.

2nd generation Korenix Ring Redundancy Technology. Failure recovery within 5ms.

Multiple uplink paths to upper switches

Couple or multiple Rapid Super Rings

Backward compatible in client mode

Inter-operate with other vendors' ring

10/100TX: 6 x RJ-45, Auto MDI/MDI-X, Auto Negotiation
10/100/1000TX: 2 x RJ-45 on front side, 1 x inner port.
SFP: 2 x Hot- Swappable SFP and combo with Gigabit RJ-45

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable,EIA/TIA-568 100-ohm (100m)
100 Base-TX: 2/4-pair UTP/STP Cat. 5 cable,EIA/TIA-568 100-ohm (100m)
1000 Base-TX: 4-pair UTP/STP Cat. 5, Cat-5e cable,EIA/TIA-568 100-ohm (100m)

2 x Power (Green)
2 x SFP Link/Activity (Green)
Inner Port Link/Activity (Green)

2 sets of power Input within 4-pin removable terminal block

Reset button is provided to restore default settings

Dual Power Input, 12~48V/-12~-48V DC with Reverse Polarity Protection

About 11.5 Watts @ DC 48V

30mm(H) x 200mm (W) x 140mm (D)

0.50kg without package and case

-20 to 70°C

5% to 95% (Non-condensing)

-40 to 85°C

1.2KV for all ports and power