| Technology |
|
|
|
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.1p Class of Service
IEEE 802.1d Spanning Tree.
IEEE 802.1w Rapid Spanning Tree
| |
| Performance |
|
|
|
Store and Forward Technology with
3.2Gbps wire-speed non-blocking Switch Fabric | |
|
|
|
|
|
|
|
|
|
Embedded 1Mbits shared buffer | |
|
|
|
14,880pps for Ethernet and
148,800 for Fast Ethernet and transfer packet size from 64
to 1522Bytes | |
| Management |
|
|
|
SNMP v1, v2c and v3, Web
browser, JetView, JetView Pro and Console Management | |
|
|
|
RFC 1213 MIBII, RFC 1493 Bridge MIB,
RFC 1757 RMON MIB, RFC 2674 VLAN MIB, RFC 1643
Ethernet like MIB, RFC1215 Trap MIB, , Korenix Private
MIB | |
|
The SNMP trap agent provides Cold start,
Warm start, Port event, Power event, Authentication failure |
|
|
1000 system entries for system or remote log server |
|
|
|
|
IEEE 802.1p class of service, with 4
priority queues per port
| |
|
|
|
Quality of Service determined by port,
Tag and IPv4 Type of Service | |
|
|
|
DHCP Client, DHCP Server and DHCP Relay (DHCP
option 82) The DHCP-Server functions supports specified
IP exclude and MAC binding function. | |
|
|
|
Supports Network Time Protocol (NTP) to synchronize time from internet | |
|
|
Port Based VLAN with Tagged, Un-Tagged and not
modified function | |
|
|
|
The IGMP supports IGMP v1, V2C protocol with IGMP Snooping and Query functions | |
|
Supports Rapid Super Ring function for network redundancy with 5ms network recovery time; To inter-operate with other higher-level switches, it provides Rapid Dual Homing (R.D.H.) technology compliant with RSTP protocol. JetNet 4006 is also compliant with IEEE802.1d 2004 edition for RSTP and STP.
|
|
|
Supports Link Layer Discovery Protocol for device discovery and building infrastructure map.
|
|
|
1 Dry Relay Contact output for port link down and System power events
Supports 1A @24V current ability.
|
|
|
TFTP and HTTP firmware upgrade
|
|
|
|
|
Message logged with server and client mode
| |
| Interface |
|
|
|
6 x 10/100 Base-TX
1 x RS-232 Console
| |
|
10/100TX: RJ-45
RS-232 Console: RJ-45
6-pin Terminal Block: Power 1 and 2, Dry Relay Alarm Output
|
|
|
|
|
10Base-T: 4-pair UTP/STP Cat. 3, 4, 5 cable,
EIA/TIA-568B 100-ohm(100m)
100Base-TX: 4-pair UTP/STP Cat.5, Cat.5E/Cat.6 cable,
EIA /TIA-568B 100-ohm(100m)
| |
|
For system reboot and factory default setting |
|
|
|
|
Power LED: Power 1/Power 2 (Green)
Fast Ethernet Port 1~6: Link (Green) /Activity (Green
blinking).
Alarm (Red): Port link down or power failure
occurred – software configuration | |
| Power Requirements |
|
|
|
Redundant Power input with polarity reverse function
Power Input: DC 12~48V | |
|
|
|
| Mechanical |
|
|
|
|
|
|
IP-31 protection, aluminum metal case | |
|
|
|
45.5 mm (H) x 185.3 mm (W) x 136 mm (D) without DIN | |
|
|
|
0.62 kg with package
0.55 kg without package | |
| Environmental |
|
|
|
|
|
|
5% to 95% (Non-condensing) | |
|
|
|
|
|
5% ~ 90% (non-condensing) | |
| Regulatory Approvals |
|
|
|
CE/EN55022. Class A, FCC Class A |
|
|
|
|
IEC 61000-4-2,
IEC 61000-4-3,
IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
