JetNet 3806G Specifications

Overview Specifications Ordering Information Datasheet

Industrial 4 PoE + 2 GbE Booster PoE Switch Four 10/100 TX PoE plus two 10/100/1000TX uplink ports Vehicle PoE: DC 12V~24V input, deliver 4 port PoE @48V 802.3af compliant PoE: Total power budget is 60W* with max.15.4W per port Two gigabit Ethernet ports for larger uplink bandwidth of surveillance Support QoS for optimizing video and VoIP stream Fault relay for active warning of port failure -25~60℃ operating temperature

Technology
Standard	IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T IEEE802.3x Flow Control and Back-pressure IEEE 802.3af Power Over Ethernet IEEE 802.1p Class of Service
Switch Technology	Store and Forward Technology with 32Gbps Switch Fabric
PoE output voltage	DC 48V
Interface
Configuration	802.3af compliant PoE ports x 4 10/100/1000Base-TX x 2 Auto MDI/MDI-X, Auto Negotiation
Cables	10 Base-T: 2-pair UTP/STP Cat. 3,4,5 cable (100m) 100 Base-Tx: 2-pair UTP/STP Cat. 5 cable (100m) 1000 Base-T: 4-pair UTP/STP Cat. 5 cable (100m) 10Base-T: 4-pair UTP/STP Cat 3,4,5, 100ohm (100m) for PoE 100Base-Tx: 4-pair UTP/STP Cat.5, 100ohm (100m) for PoE
Diagnostic LED	Power (Green) x1 Fault alarm (Red) x1 PoE (Green) x4
LED on Ethernet port	Link/ Activity (Green on/ blinking) Gigabit copper: Link/Act (Green on/ Blinking) Full duplex/ Collision (Yellow on/ Blinking) Gigabit copper: Speed (Yellow Blinking)
Relay Alarm	Dry Relay output with 1A@24V ability
PoE Technology	Alternative B
Performance
Transfer Rate	14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100 pps for Gigabit Ethernet
Transfer packet size	64 bytes to 1522 bytes (with untagged and tagged frame)
MAC Address	8K
Packet Buffer	1 Mbits
Power Requirements
Power	12~24V
Power Consumption	25W without PoE, 80W with PoE
Mechanical
Construction	Rugged Aluminum Alloy Chassis
Mounting	DIN-Rail mount
Dimensions	66(W) x 149(H) x 131.2(D) mm (with Din-rail clip)
Weight	1.05kg
Environmental
Operating Temperature	-13 ~ 140°F(-25 ~ 60°C), 5 to 95% RH
Storage Temperature	-40 ~ 176°F(-40 ~ 80°C), 5 to 95% RH
Regulatory Approvals
EMI	FCC class A, CE/EN55022 Class A
EMS	EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27 (50g peak acceleration)
Vibration	IEC60068-2-6 (5g/5~500Hz/random operation)
MTBF	greater than 200,000 hours @ 25℃
Warranty	5 years
	*Pending