| Technology |
|
|
|
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3af Power over Ethernet
IEEE802.3x flow control
| |
|
|
|
|
|
Store and forward technology and
with 1.0Gbps internal switch fabric. | |
| Interface |
|
|
|
5 x 10/100 Base-TX with 4 Power over
Ethernet injector ,Auto MDI/MDI-X, Auto-Negotiation | |
|
RJ -45 port # 1~# 4 support IEEE 802.3af End-point,
Alternative A mode.
Per port provides 15.4W ability.
Positive (VCC+): RJ -45 pin 1, 2.
Negative (VCC-): RJ -45 pin 3, 6. Data (1,2,3,6) |
|
|
|
|
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable,
EIA/TIA-568 100-ohm(100m)
100Base-TX: 2-pair UTP/STP Cat. 5 cable,
EIA/TIA-568 100-ohm(100m) | |
| PoE output voltage Connector |
|
|
|
|
|
Per unit: Power 1 (Green), Power 2 (Green), Fault(Red)
Per port: Link/Activity (Green), Full duplex/Collision (Yellow)
PoE: Feeding Power (Green) | |
| Performance |
|
|
|
14,880pps for Ethernet port
148,800pps for Fast Ethernet port | |
|
|
|
64 bytes to 1522 bytes (with VLAN tag) | |
|
|
|
|
|
|
|
|
|
| Power Requirements |
|
|
|
System Power
Input Voltage: DC24/48V
Overload current protection: Fast-Blown Fuse,
Standard: 3.5A; With E model: 4A
PoE Output Voltage: DC 48V
| |
|
|
|
62.5W @ 48VDC
67W @ 24VDC | |
|
|
|
| Mechanical |
|
|
|
DIN-rail kit and wall mounting | |
|
|
|
IP-30 grade aluminum metal case | |
|
|
|
140 mm (H) x 48.6 mm(W) x 95 mm (D) | |
| Environmental |
|
|
|
|
|
|
5% to 95% (Non-condensing) | |
|
|
|
| Regulatory Approvals |
|
|
|
|
|
|
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,
EN61000-4-6, EN61000-4-8, EN61000-6-2, EN61000-6-4 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|