|
Technology |
|
|
|
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3x Flow Control and Back-pressure
Auto MDI/MDIX | |
|
|
|
Store and Forward architecture | |
| Interface |
|
|
|
|
|
|
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (100m) | |
|
|
|
Per port: Link/Activity (Green), Full duplex/Collision (Green)
Per unit: Power x 3 (Green), Fault (Red), R.M (Orange) | |
|
|
|
A removable 6-pin terminal block Relay output for port break and power failure | |
| Management |
|
|
|
Two ports of each switch are used for Super Ring topology to provide redundant backup paths. The recovery time is less than 300ms. Super Ring is activated when the switch is powered on (plug-n-play) | |
| Performance |
|
|
|
14,880 pps for Ethernet port and 148,800 pps for Fast Ethernet port
Transfer packet size: 64 bytes to 1522 bytes | |
|
|
|
|
|
|
|
|
|
| Power Requirements |
|
|
| Connection: A removable 6-pin terminal block | |
|
|
|
24 VDC(12 to 48 VDC), dual inputs | |
| Reverse Polatiry Protection | |
|
|
|
|
| Mechanical |
|
|
|
DIN-Rail kit and wall mounting ears for 3-way installation | |
|
|
|
IP-31 protection, aluminum case | |
|
|
|
53 mm (W) x 135 mm (H) x 105mm (D) | |
| Environmental |
|
|
|
-10 to 70°C (14 to 158°F) | |
|
|
|
5% to 95% (Non-condensing) | |
| Regulatory Approvals |
|
|
|
|
|
|
EN61000-4-2, EN61000-4-3, EN61000-4-4
EN6100-4-5, EN6100-4-6, EN6100-4-8, EN6100-4-11 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
305,482 hours * MIL-HDBK-217F (MILITARY HANDBOOK) standard | |
|
|
|
Datasheet