Korenix - Beijer Electronics Group
JetView Pro
JetPoE
JetNet Selection GuideHigh Tech TalkJetNet 6000 Layer3 Gigabit ManagedJetNet 5000 IEC 61850-3 Layer 2/3 Gigabit ManagedJetNet 5000/6000 Layer2 Gigabit ManagedJetNet 4000 Full ManagedJetNet 3000 Entry SwitchJetNet 2000 Slim Switch
JetRock
JetWave
JetBox
JetCard
JetIO
JetCon
JetPort
USA Comtrol DeviceMaster
Accessories
Professional Demo Box Package
 

JetNet 3018G Specifications

Overview
Specifications
Ordering Information

Datasheet

Industrial 16+2G Gigabit Ethernet Switch 

  • 16 10/100-TX and 2 Gigabit RJ-45/SFP combo ports (10/100/1000 Base-TX, 1000Base-X)
  • Non-Blocking Switching Performance
  • Supports up to 9,216 bytes Jumbo Frame Packet for secured large file transmission
  • 2 Relay Outputs for Gigabit port Link Failure Detection
  • IEEE 802.1p Quality of Service (QoS) for packet forwarding precedence
  • Auto Gigabit RJ-45/SFP module detection
  • IP31 rugged aluminum case
  • Dual 24V (12-48V) DC power inputs
  • Operating temperature -25~70oC

Technology
Standard

IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit Ethernet
IEEE802.3x flow control and back pressure
IEEE802.1p Class of Service

Performance
Switch Technology

Store and Forward Technology, up to 12.8Gbps High System Throughput

MAC Address

8K MAC address table

System Packet Buffer

2Mbits shared packet buffer

Jumbo Frame

Enable Jumbo Frame, Up to 9,216 bytes

Quality of Service

CCompliance with IEEE802.1p class of service with Tag Based Priority rule.
Each switch port provides 4 priority queues as following - 8 (Higher) : 4(High) : 2(Low) :1(Lower) scheduling.
The Tag Priority ID as following: Highest (6,7), High (4,5), Low (0,3), Lowest (1,2)

Interface
Number of Ports

16 x 10/100 Base-TX with Auto MDI/ MDI-X function, ,Auto-Negotiation
2 x 1000Base-T supports Auto MDI/MDI-X , Auto- Negotiation function and combo with Small Form Factor Package (SFP) socket

Connectors

10/100 Base-TX: RJ-45
1000Base-T: RJ-45

SFP

supports all 3.3v SFP type Gigabit fiber transceiver

Power

4-Pin Removable Terminal Block

Relay Output

4-Pin Removable Terminal Block
DIP 1 = Relay 1 = Port 17 Link Down
DIP 2 = Relay 2 = Port 18 Link Down

Cables

RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted pair cable. The maximum link distance is 100 meters

Diagnostic LED

System: Power 1, Power 2 (Green); Relay 1, Relay 2 (Red)
10/100/1000Base-T RJ-45: Link/Activity (Green/Green Blinking), Full Duplex/Collision (Yellow/Yellow Blinking)
Gigabit SFP: Link/Activity (Green/Green Blinking)
Relay Output: Relay Output 1 (Red), Relay Output 2 (Red)
10/100 Mbps RJ-45 port: Link (Green/Left), Activity(Yellow Blinking/Right)
1000Base-T RJ-45 port: 10/100 Link (Green/Left), 1000 Link (Yellow/Right), Activity (Green Blinking/Yellow Blinking)
SFP port: Link/Activity (Green/Green Blinking)

Power Requirements
Power Supply

4 pins terminal block for power input.
DC 24V (12~48V) with polarity reverse protection and redundant function

Power Consumption

Max. 15 Watts

Mechanical
Installation

DIN-Rail or Wall Mount

Case

Aluminum metal case with IP31 grade case protection for drop-waterproof and dustproof

Dimensions

137mm(H) x 96mm (W) x 129mm (D)

Weight

1 kg without package

Environmental
Operating Temperature

-25 to 70°C

Operating Humidity

0% ~ 90% (Non-condensing)

Storage Temperature

-40 ~ 85°C

Storage Humidity

0% ~ 95% (Non-condensing)

Hi-Pot

1.5KV

Regulatory Approvals
EMI

FCC Class A, CE/EN55022.

EMS

IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8

Safety

UL508

Vibration

IEC60068-2-6

Shock

IEC60068-2-27

Free Fall

IEC60068-2-32

MTBF
At least 200,000 hours @ 25oC
Warranty
5 years