JetNet 3008G Specifications

Overview Specifications Ordering Information Datasheet

Industrial 8-port Full Gigabit Ethernet Switch 8 Gigabit Ethernet Ports with Auto MDI/MDI-X 9.6K bytes Jumbo frame for large file transmission IEEE 802.1p Quality of Service (QoS) for packet forwarding precedence Broadcast storm packet filtering Dual DC 12~48V power inputs Port and power event alarm IP31 rugged aluminum case Operating temperature -10~70oC

Technology
Standard	IEEE802.3 10Base-T IEEE802.3u 100Base-TX IEEE802.3ab 1000Base-T IEEE802.1p Class of Service IEEE802.1Q Quality of Service IEEE802.3x Flow Control
Interface
Number of Ports	8 x 10/100/1000 Base-T(X) with F/H Duplex, Auto MDI/MDI-X, Auto-Negotiation function
Connectors	10/100/1000 Base-T(X): RJ-45
Power	6-pin removable terminal block Alarm relay included in 6-pin removable terminal block: Terminal block connector with 1A @DC24V carry ability
Cables	Cat.3, Cat.4, Cat.5 or Cat.5e unshielded twisted pair or shielded twisted pair cable. The Link distance is 100 meters in maximum
Diagnostic LED	Power (Green) x2 Port: Link (Green on) / Activity (Green blink) Port: 1000Mbps (Yellow on) / 100 or 10Mbps (Yellow off) Alarm: Port /Power Event (Red on)
Performance
Aggregate System Throughput	1.49Mpps
MAC Address	4K MAC
Packet Buffer	192Kbits
Transfer Packet Size	14,880pps for Ethernet 10Base-T 148,800pps for Fast Ethernet 1488,100pps for Gigabit Ethernet Packet size from 64~1518 Bytes
Jumbo Frame	9,720 Bytes (gigabit only)
Broadcast Storm Control	Default enabled. Traffic threshold: 128Mbps@1000Mbps; 12.8Mbps@100Mbps; 1.28Mbps@10Mbps
Quality of Service	Default Enabled. Compliance with IEEE802.1p class of service with Tag Based Priority. Each port support 4 priority queues with 8(Higher):4(High):2(Lo w):1(Lowest) scheduling. The Tag Priority ID as following: Higher (6,7), High (4,5), Low (0,3), Lowest (1,2)
Event Alarm Relay	Enabled by 9-pin Dip switch . Provides port (SW1-8) and power (SW9) event alarm
Power Requirements
System Power	2 Power inputs with redundancy and polarity reverse protection.
Voltage	DC 24V (12~48V)
Power Consumption	max 8 Watts @ 48VDC
Current	0.2A @12VDC
Mechanical
Installation	DIN-Rail mount
Casing	IP31 grade aluminum metal case
Dimensions	120mm (H) x 55mm (W) x 108mm (D) (without DIN rail clip)
Weight	0.775kg with package 0.525kg without package
Environmental
Operating Temperature	-10 ~ 70oC
Operating Humidity	0% ~ 95%, (non-condensing)
Storage Temperature	-40 ~ 85oC
Storage Humidity	0% ~ 95%, (non-condensing)
Regulatory Approvals
EMI	FCC class A, CE/EN55022 class A
EMS	IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8
Shock	IEC 60068-2-27
Vibration	IEC 60068-2-6
Free Fall	IEC 60068-2-32
Warranty	5 years