Korenix 3"R" Value
JetPoE
JetNet Selection GuideHigh Tech TalkJetNet 5000 Gigabit ManagedJetNet 4500 Full ManagedJetNet 4000 Web ManagedJetNet 3500 Ring SwitchJetNet 3000 Entry Switch JetNet 2000 Slim Switch
JetCon
JetBox
JetPort
JetCard
Accessories
Professional Demo Box Package
 

JetNet 2005 Specifications

Overview
Specifications
Ordering Information

Datasheet

Industrial 5-port Compact Ethernet Switch 

  • Industrial Ethernet Switch with 5 Auto-MDI/MDI-X 10/100-TX Ports
  • Slim-sized for Industrial Din-rail Application
  • Support 10/100Base-TX Auto MDI/MDI-X and Auto Negotiation
  • 18~27VAC or 18~32VDC Power Input by 2-pin Terminal Block
  • Relay Output for Port Alarm
  • Provide 1500VAC HIPOT Protection
  • Aluminum Case with IP31 Protection
  • DIN-Rail Mount

Technology
Standard

IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3x flow control

Switch Technology

Store and forward technology and with 3.2Gbps switch bandwidth

Aggregate System Throughput

1.49Mpps

Interface
Number of Ports

5 x 10/100 Base-TX with Auto MDI/MDI-X function

Connectors

10/100 Base-TX: RJ-45
Power / Relay: 4-pin terminal block

Cables

CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted
pair cable. The Link distance is 100 meters in maximum

Port Alarm DIP Switch

DIP 1~5: Enable or disable port link down alarm from port 1 to port 5
On: Enable port link down alarm
Off: Disable port link down alarm

Diagnostic LED

System: Power (green), Fault (red on)
RJ-45 port: 100Mbps Link (green on)/Activity(green flashing),
10Mbps Link (yellow on)/Activity(yellow flashing)

Power Requirements
System Power

2 pins terminal block for power input.
DC 24V(18~32V)with reverse polarity protection.AC 18~27V, 47~63Hz

Power Consumption

4.32 Watts @ DC 24V

Mechanical
Installation

DIN-Rail mount

Casing

IP-31 protection, aluminum case

Dimensions

111.8mm(H) x 30mm (W) x 98.2mm (D) ( with DIN rail clip)
111.8mm(H) x 30mm (W) x 89.4mm (D) ( without DIN rail clip)

Weight

372g with package
290g without package

Environmental
Operating Temperature

-10 to 70°C

Operating Humidity

5% to 95% (Non-condensing)

Storage Temperature

-40 to 80°C

Storage Humidity

0%~ 90% non-condensing

Regulatory Approvals
EMI

FCC Class A, CE/EN55022

EMC Immunity Interface

EN61000-4-2: 6Kv Contact, 8Kv Air, ESD contact indirect 6kv
EN61000-4-3: 10V/m, 80 MHz - 1 GHz, AM 1 KHz, 80% modulation,
10V/m, 0.9 - 1.8 GHz, FM 200 Hz, 50% modulation
EN61000-4-4: PWR Supply Lines:+/- 2KV,Communication Lines:+/- 2KV
EN61000-4-5: 2KV on power line (L-N), 4KV on power line (L-PE, N-PE), 1.2uS Tr/ 50uS Th
EN61000-4-6: PWR Supply Lines:10 Vrms, 150 KHz - 80 MHz;AM 1 KHz,
80% modulation; Communication Lines:10 Vrms, 150 KHz - 80 MHz;AM 1 KHz,80% modulation;Relay:10 Vrms, 150 KHz - 80 MHz;AM 1 KHz, 80% modulation
EN61000-4-8: 50Hz, 3A/m
EN61000-4-11: 30% 10 ms,60% 100 ms, > 95% 5000 ms

Safety
CE/EN60950
Shock

IEC60068-2-27 shock: 50 g, 11ms, 4g, +/- X, +/- Y, +/- Z

Free Fall

IEC60068-2-32 free fall:90 cm, 1 corner, 3 edges, 6 faces

Vibration

IEC60068-2-6 vibration: 1 mm, 2 Hz - 13.2 Hz, 90 min.; 0.7g, 13.2 Hz - 100 Hz,90 min.; 3.5 mm, 3 Hz - 9 Hz, 10 cycles, 1 octave/min.; 1g, 9 Hz - 150 Hz,10 cycles, 1 octave/min

MTBF:
hours