JetCon 3301 Specifications

Overview Specifications Ordering Information Datasheet

Gigabit Ethernet Media Converter  One port 1000Base-T to Gigabit Fiber media converter Link-Loss-Forwarding(LLF) far-end fault detection technology Compliance with IEEE 802.3ab/IEEE 802.3z standards Supports 19" 3U 16 slots chassis mounting, Rack-1001/1002

Technology
Standard	IEEE802.3ab 1000Base-T IEEE802.3z 1000Base-SX/LX
Interface
Number of Ports	1 x 1000 Base-T with Auto MDI/MDI-X function, 1 x 1000BaseSX/LX
Connectors	1000 Base-T: RJ-45 1000Base-SX/LX: SC or LC Power plug
Cables	RJ-45 connector: supports CAT-3,CAT-4,CAT-5, 5e or 6 unshielded twisted pair or shielded twisted pair cable. The link distance is maximum 100 meters. SC connector: supports multi-mode or single-mode optical fiber. LC connector: supports multi-mode or single-mode optical fiber. Multi-mode fiber: 50/125um, max. distance 550 M, 60/125um, max. distance 220 M, Single-mode fiber: 9/125um or 10/125 um, max. distance 10/20 KM
Fiber Transceiver	JetCon 3301, Multi-mode:550M max. distance Wave-length: 850nm Maximum TX power: -4dB Minimum TX power: -9dB Sensitivity: -17dB Power Budget: 8dB Single-mode: 10KM max. distance Wave-length: 1310nm Maximum TX power: -3dB Minimum TX power: -8dB Sensitivity: -20dB Power Budget: 12dB Single-mode: 20KM max. distance Wave-length: 1310nm Maximum TX power: -2dB Minimum TX power: -7dB Sensitivity: -22dB Power Budget: 15dB
Diagnostic LED	System: Power RJ-45 port: Link & TX LEDs Fiber port: Link & RX LEDs
Power Requirements
System Power	5V DC 1.4A
Power Consumption	5.2 Watts (Maximum)
Mechanical
Installation	Desktop or chassis mount
Casing	Sheet metal case
Dimensions	102mm(H) x 74mm (W) x 22mm (L) with DIN
Weight	240g without power adapter
Environmental
Operating Temperature	0 to 60°C
Operating Humidity	10% to 90% (Non-condensing)
Storage Temperature	-20 to 70°C
Storage Humidity	5%~ 90% (Non-condensing)
Regulatory Approvals
EMI	FCC Class A, CE/EN55022
Warranty	3 years