Technology |
|
|
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3u 100Base-FX
IEEE 802.3x Flow Control and Back Pressure | |
|
3.2 Gbps Store and Forwarding Technology |
|
System forwarding performance |
|
1.19 Mega packets per second, 64 bytes packet size. (Switch Mode)
14880 pps for 10Base-T
148810 pps for 100Base-TX/ FX |
|
|
1K MAC address entries with automatic learning and aging (Switch Mode only) |
|
|
|
|
|
|
Converter/ Switch mode selected by DIP switch
Switch Mode: data exchange on 4 ports (Channel A, B exchange)
Converter mode: data forwarding on independent channel (A, B) |
|
|
Dry Relay Output with 1A @24V DC ability |
|
Interface |
|
Ethernet copper port:
2 × 10/100TX ports with Auto MDI/MDI-X, Auto Negotiation, flow control and back-pressure enabled (Switch mode)
Fiber port:
2 × 100Mbps Fiber port, SC flow control and back-pressure disabled
JetCon 2302-m: Multi-mode (Channel A,B)
JetCon 2302-s: Single-mode (Channel A,B) |
|
|
RJ-45 Connector:
10Base-T: 2-pairs UTP/STP Cat-3,4 TIA/EIA 568-B cable, 100 meters
100Base-TX : 2/4 pairs UTP/STP Cat.5 TIA/EIA 568-B cable, 100 meters
Fast Ethernet Fiber Transceiver:
JetCon 2302-m: 2KM distance, 50~62.5/125um Multi-mode fiber cable.
JetCon 2302-s: 30KM distance,8~10/125um Single-mode fiber cable. |
|
|
System Power (Green on) : Power 1 , 2
Relay Alarm: Active (Red)
Op. Mode: Convert (Green on)
Fiber Ethernet Port(Channel A/B): Link/Activity (Green on/
Yellow Blinking)
Ethernet Port: Link/Activity (Green on/Yellow Blinking) |
|
|
For Operating mode change
DIP Switch 1~4: Port Event Alarm Control, Enable(On)/ Disable (Off)
DIP Switch 5: Operating mode select, Converter mode (On)/ Switch mode (Off)
DIP Switch 6: Power Event Alarm Control, Enable(On)/ Disable (Off)
DIP Switch 7: Not available |
|
|
|
|
|
|
|
Power Requirements |
|
|
DC 10~60V with polarity reverses correction.
Supports Positive/Negative power system | |
|
|
|
Mechanical |
|
|
|
|
|
Ingress Protection code -30 | |
|
|
|
99 (D) x55(W)x 120(H), unit:mm (without Din-rail kit) | |
|
|
Environmental |
|
|
|
-25~ 75°C (JetCon 2302-w:-40~ 75°C) | |
|
|
|
0% to 95% (Non-condensing) | |
|
|
|
|
0% to 95% (Non-condensing) |
|
|
AC 1.5KV on port to port and port to power |
|
Regulatory Approvals |
|
|
|
Compliant with EN 50121-3-2 EMC | |
|
|
|
CE/EN 61000-6-4, CISPR-16-1-2:2003,
CISPR-16-2-1:2003, CISPR-16-2-3:2006, CISPR-22:2005+A1 :2005(9.6),
FCC part 15B Class A | |
|
|
CE/ EN 61000-6-2 :2005
IEC 61000-4-2 :2008, IEC 61000-4-3 :2006+A1 :2007,IEC
61000-4-4 :2004, IEC 61000-4-5 :2005, IEC 61000-4-6 :2008,
IEC 61000-4-8 :1993+A1 :2000 | |
|
|
|
|
|
|
|
|
