JetCard 5400-w Specifications

Hardware Specifications

System
Processor	Intel Xscale IXP435 400MHz RISC-based
System Memory	128MB DDR2 RAM
System Flash	32MB
Ethernet	10/100 Based-Tx RJ-45 connector x5
USB	USB 2.0 x1 (Host) Supporting devices: USB flash, wireless dongle
Console port	3-pin header (RS-232 Interface)
System Control	LED per port (on the port): Link/Activity (Green on/Green blinking) Full Duplex/Collision (Yellow on/ Yellow blinking) LED per unit: Power on/off x1 (Green on/off) Reset button x1
Watchdog Timer	Generates a time-out system reset, 1 sec.
Power Supply	DC 12~48V
Power Consumption	Max. 25W
OS support	Embedded Linux 2.6.20
Mechanical
Dimension	146 (W) x 102 (D) mm
NetWeight	0.4kg
Environment
Operating Temp	-40 ~ 176°F(-40 ~ 80°C), 5 to 95% RH
Storage Temp	-40 ~ 176°F(-40 ~ 80°C), 5 to 95% RH
EMC	FCC class A, CE EN55022 class A EN55024 EN61000-3-2, 3 EN61000-4-2, 3, 4, 5, 6, 8, 11 IEC 60950 MTBF: at least 200,000 hours @25°C
Warranty	5 years
Software Specifications
Embedded Linux 2.6.20
Bootloader	JetBox bootloader
Protocol Stack	ARP, PPP, CHAP, IPv4, IPv6, PAP, ICMP, TCP, UDP, NFS, RIP, RIP-II, OSPF, ISIS, BGP, DVMRP, L2TP, PPTP, SLIP, VLAN, IPsec, OpenVPN
Software packages	busybox (telnetd, inetd, udhcp), e2fsprongs, i2c-tools, ltp-testsuite, microcom, mtd, pciutils, usbmount,usbutils, bridge-utils, ethtool, iptables, net-snmp, ntp, openssh, openssl,openVPN, openSWAN, pppd, pptp-linux, proftpd, samba, smtpclient, bind, l2tp, mrouted, quagga, wireless-tools, jamvm, syslogd, udhcp, setserial, goahead web server
Device Drivers	USB, Watchdog timer, UART, Ethernet

*to be confirmed