Product Highlights
JetBox 9310 ━ Industrial PoE Networking Computer
 |
JetBox 9310 is an patented 6 in 1 Networking Computer:
★ Industrial computer
1. RISC, 64MB SDRAM, Fan-less and wide operation temp (-40 ~ 80°C)
2. Linux, Modbus gateway for ready to use.
3. 2 USB, SD card for control program upgraded.
★ Industrial Router (5 Ethernet ports)
1. Free combination between WAN & LAN
2. IP routed, static routing, NAT, firewall, DMZ
★ Industrial PoE
1. 4 ports, IEEE802.3af 15.4W
2. PoE scheduling
★ Industrial Managed Switch
1. QoS
2. VLAN (802.1Q, port-based)
★ Industrial Serial Device Server
1. 2- RS232 ports, 2 RS232/422/485 ports
2. Virtual COM
★ Industrial Digital I/O Controller
1. 4 DI & 4 DO
2. DIO scheduling |
In a networking communication environment, router, switch and computer are indispensable devices to a typical networking architecture. Along with technology development, the complexity of devices increases and the troublesome settings become more and more confusing. Hence, the revolution of networking devices is anticipated. Functional integration and human-oriented manipulation will be the mainstream in next networking generation.
JetBox 9310 is a global pioneer to invent 6 in 1 Industrial Networking Computer which consolidates Industrial Computer, Router, PoE and Managed Switch. In addition, it equipped with the interfaces of serial server and Ethernet I/O is making the network simple.
JetBox 9310 is a RISC-based embedded computer, system memory 64MB SDRAM default (128MB optional) and carries all major interfaces such as five Ethernet ports, two USB2.0 ports, two RS-232 ports, two RS-232/422/485 ports, four digital inputs, four digital outputs and one SD card slot. Moreover, built-in Linux OS and network essential applications make JetBox 9310 a powerful network engine.
|
Technology
Ethernet I/O ━ High Tech Talk
|
JetI/O series is Korenix new product line of Intelligent I/O Server for distributive monitoring and controls. Continued from the paragraph about Ethernet I/O technology in Korenix e-paper March 2008, we are going to introduce other three features of JetI/O series.
A) Industrial Modbus/TCP Compatibility
B)OPC Server Utility
C) Condition-&-Go
|
Industrial Modbus/TCP Compatibility
JetI/O series support Modbus/TCP protocol, Modbus/TCP is the most commonly protocol in communicating between the industrial electronic devices over TCP/IP. Modbus/TCP uses binary encoding of data and TCP/IP’s error detection mechanism, typical function codes 01, 02, 03, 04…is attached with protocol addresses to identify the meaning of each tags. Modbus/TCP allows users to monitor and control the I/O status and settings for the connected devices. Thus the HMI and SCADA applications can easily integrate the JetI/O devices.
OPC Server Utility
OPC Server is the initial of OLE for Process Control. In tradition, it’s hard to interoperate among the different systems and devices. The OPC Standard defines methods for exchanging data between the clients, using MS operating system. Thus, it makes a possible interoperability between the device providers and can easily to be implemented by HMI, SCADA, Control and custom applications.
JetI/O OPC Server Utility is a user-friendly interface to configure and monitor the devices, the benefits are below:
Easy to use: The utility pre-defines the tags for all the channels. The tags are the basic units to control or monitor the devices’ configuration and status. 3 Simple steps to create tags: Add New Device -> Configure Device Properties -> Generate Tag
|
Save development time: Using the “Generate Tags” feature, users can easily generate tags for all channels of each product. With the “Simulate I/O” feature, users can practice and develop projects even they can’t access the physical device.
Save cost: The utility is installed with the Block I/O Configuration utility. It is a free and convenient tool when you purchase Korenix JetI/O 6500 Series. The OPC Server utility can save the cost to buy 3rd party OPC Server development tool and save engineer time loading.
Compatibility: Korenix JetI/O supports OPC Server for Modbus/TCP. The OPC Server driver can be called by different OPC Clients, HMI or SCADA.
|
Condition-&-Go
The “Condition & Go” logic rule provides one-time operation for Conditions and Actions of the same entry. The theory is the same as the “IF-Then” rule. The rules are easy to practice. Users don’t need to acknowledge extra program script to configure it. Thus, when the “Conditions” is reached, the system automatically activates the “Actions”.
The maximum “Condition&Go” logic rules that JetI/O 6550 supports is up to 8. Each rule can support up to 4 different conditions and 4 different actions. The supported conditions and actions are as below: |
|
Applications & Success Stories
Bus Surveillance Evolution with Korenix Embedded Computer
JetBox 9300 －Advanced System Platform
Bus Surveillance System is used to provide the video surveillance in the bus and the vehicle locations through GPS modem, transmitting via the router on JetBox 9300.
The video stream from each IP camera shall be converted into Ethernet frames which are transmitted to JetBox 9300 which equipped with router function. Through GPS modem, the control center will receive the status inside the bus and the locations of each bus to control the traffic condition. Also, the environment inside the bus is humid, high-temp and shocked, JetBox 9300 is with wide range temp (-40~80°C), anti-shock/vibration and IP31 which is the best solution for bus companies. |
|
Surface Ship Systems for Detection Underwater
 |
 |
Mr. LEHMANN Philippe
APLUS-SA
FranceSoner |
 |
|
Floating Sonar detection systems are commonly used by the French Navy in order to detect immersed objects nearby. The detection systems are developed to cover a great deal of operational requirements and normally compact enough to be installed on different warships.
To ensure the nonstop transmission of the essential data collected from the underwater sonar back to the control room in the cabin, it requires not only high-speed gigabit Ethernet and fiber connection, but also the rapid ring recovery in case any link failure occurred. In addition, water-proof and corrosive-resistant network equipments are indispensable for the severe maritime environment.
Therefore, JetNet 5010G, the industrial 10-port managed switch was chosen in this project due to its flexibility of using fast gigabit and SFP combo ports, with its rapid ring recovery time as low as 5ms. Korenix enhanced protection of conformal coating on the switch board against corrosive an maritime atmosphere, and the immediate technical support from Korenix team.
Main Products
JetNet 5010G Industrial 7+3G Gigabit Managed Ethernet Switch
Transceiver SFP1000SX
Why Korenix
Flexibility - Adaptation of the firmware of theswitch to the constraints of the application.
Solid - Rigid Aluminum Case Complies with IP31, Curvilinear heat dispersing, Redundant power, DINRail /Wall-Mounting /Desktop Installation.
Customization - Service of adding conformal coating on switch board under reasonable budget with a guarantee of 5 years.
|
Corporate News & Events
Korenix is Welcome you join Industrial Ethernet Training!
|
Korenix Technology is honored to welcome you join KCE (Korenix Certification Engineer Program) training. In order to coordinate your schedule in Computex, it takes place from June 5 to June 7. The KCE certification will be conferred on those who attain the technical approvals. Furthermore, please e-mail to sales@korenix.com it’s our pleasure to understand your preference concerning the Sessions & Schedule of the training. For more information, please go to http://www.korenix.com/korenix-certification-engineer-program.htm |
Korenix Industrial Ethernet Switch JetNet 5010G Receives Control Engineering's Product of the Year 2007 Award!
|
Control Engineering Magazine has chosen Korenix’s JetNet 5010G as the winner of PRODUCT OF THE YEAR 2007. Control Engineering is a well-known international magazine that offers the latest trends and technologies. Korenix wins this competition "PRODUCT OF THE YEAR 2007" with JetNet 5010G of Russian version Control Engineering magazine. The annual awards competition is widely recognized as the premier honor for new products in the industrial control and automation markets. |
Korenix Technology
Tel:+886-2-82193000
sales@korenix.com |
|
|
|
