Korenix - Beijer Electronics Group
JetView Pro
JetPoE
JetNet
JetRock
JetWave OverviewSelection GuideHigh Tech Talk2600 Series2400 Series
JetBox
JetCard
JetIO
JetCon
JetPort
USA Comtrol DeviceMaster
Accessories
Professional Demo Box Package
 

JetWave 2610 Specification

JetWave Wireless Outdoor AP

Overview
Specifications
Ordering Information

Datasheet

Outdoor Long Range IEEE802.11a Wireless AP 

  • Supports IEEE 802.11a 5.8GHz band
  • Up to 54Mbps maximum net data rate
  • High Gain 23dBi Panel Antenna maximizes transmission distance up to 40KM
  • Wireless QoS (WMM) for video precedence transmission
  • Supports Base Station, CPE, Point to Point and Point to Multiple Point Connectivity
  • Intel TDMA Technology for long distance connectivity
  • Multiple Data Encryption algorithms, including WEP,WPA,WPA2
  • Secured Access Control by HTTPS, SSH, 802.1x, MAC
  • Auto ACK-Time adjustment, Link test for easy installation
  • Rugged IP67 Protection Housing for outdoor installation
  • Power supply compatible with PoE Source
  • -30~70oC operating temperature for hazardous environment application


Technology
Standard

IEEE 802.11a/b/g for Wireless LAN
IEEE 802.11i Wireless Security
IEEE 802.3u for 10/100Base-TX
IEEE 802.3af for Power over Ethernet
IEEE802.1D Spanning Tree Protocol

Performance
CPU

IXP425, 533MHz

System Memory

16MB Flash
32MB SDRAM

Operating Frequency

5.8GHz Band:
FCC* : 5.725~5.850 GHz
CE** : 5.470~5.600 GHz; 5.650~5.725 GHz
2.4GHz Band:
FCC : 2.412~2.462GHz
CE : 2.412~2.472GHz
(Programmable for different country regulations)

RF Modulation

802.11a: OFDM (BPSK, QPSK, 16-QAm, 64QAM)
802.11b/g: DSS (CCK, DQPSK, DBPSK)

RF Output Power (Max. of Avg.)

5.8GHz Band:
24dBm at Radio for FCC (Band 4)
30dB EIRP for ETSI 301 893 (Band3)
2.4GHz Band:
23dBm (Max. of Avg.) at Radio for FCC
20dB EIRP for CE (ETSI 300 328)
(Controllable for different country regulations)

Sensitivity

5.8GHz Band:
=-90dBm @6Mbps
=-73dBm @54Mbps
2.4GHz Band:
=-96dBm @1Mbps
=-90dBm @6Mbps
=-72dBm @54Mbps

Default Antenna Characteristics
Gain

23dBi

Frequency

5400~5850 MHz

Direction

Directional Antenna Choose Antenna!

HPBW (Horizontal)

10 Deg.

HPBW (Vertical)

10 Deg.

Interface
Ethernet Port

1 x 10/100Base-T, Auto Negotiation

RS-232

RS-232 (UART) in RJ45 Form Factor For debug purpose
P1: TXD0, P2: DSR0, P3: RXD0, P4: TXD1,
P5: RXD1, P6: DTR1, P7:Hard Reset, P8:GND

Buzzer

Embedded buzzer for power on and Antenna Alignment indication

Reset Pin

Short P7 and P8 less than 1 sec. to reset system
Short P7 and P8 less than 5 sec. to reset to factory default

Cables

2/4-pair UTP/STP Cat. 5 cable (100m)

Management
Management

Web UI (Secure SSL), Command Line Interface (SSH or RS-232 (9600)), Windows-based Utility, SNMPv2, DHCP Client, Configuration backup/restore

Statistics

Wireless and Ethernet Traffic statistics

Firmware upgrade

Web, Windows management tool, TFTP, firmware backup

Operating Mode

JetWave 2610/2640: Base Station, CPE, Point to Point, Point to Multiple Point
JetWave 2620: Base Station, CPE, Relay, Point to Point, Point to Multiple Point

Radio Bandwidth Control

5MHz/10MHz/20MHz/40MHz

Super A/G

Fast Frames, Burst, Compression modes

TDM Coordination

Traffic management

Intel TDMA

For long distance transmission

Transmit Power Control

Adjust RF output power

Link Aggregation

To enhance Throughput with dual radio card (2620 only)

Distance in Meters

Auto ACK-Time adjustment

Wireless Isolation

Isolate Wireless data from clients

Antenna Alignment

Easy tool to align antenna performance

Link Test

Self-Wireless Connection test

Secured Access

HTTPS, SSH, 802.1x, Radius Server, Access Control by Trusted Wireless station, manually add station, MAC Address Authentication

Security Encryption

WEP 64/128/152 bits, WPA-PSK (TKIP), WPA2-PSK(AES), Mixed WPA/WPA2

STP

Spanning Tree Protocol with Fast Forwarding

NTP

Network Time Management

System Log

Log occurred events

Power Requirements
Power

Power over Ethernet, IEEE802.3af compliant

PoE Injector

Input: 100-240VAC, 0.6A 50-60Hz
Output: 48V, 0.4A

Power Consumption

Above 6 Watts @ DC 48V, depend on user volume

Mechanical
Enclosure

IP-67 & Level 17 Beaufort Scale protection

Vent

Vent for exclude moisture

External Antenna connector

N-Type

Dimension

Box: 237 mm (H) x 237 mm (W) x 68 mm (D)
Antenna: 320 mm (H) x 320 mm (W) x 18 mm (D)

Installation

Pole Mount (ADC-12 Aluminum alloy)

Weight

4.43 kg with package

Environmental
Operating Temperature

-30 to 70°C

Operating Humidity

10% to 95% (Non-condensing)

Storage Temperature

-40 to 85 °C

Regulatory Approvals
EMI

FCC part 15 Subpart B&C, CE EN301 893(5G)

EMS

CE EN301 489-1/17

Shock

IEC 60068-2-29

Vibration

IEC 60068-2-6

Free Fall

IEC 60068-2-32

Warranty
3 years