Overview
Specifications
Ordering Information

Datasheet

Managed Ethernet 14-CH DI and 8-CH DO Module

14-Ch Digital Input with DI and Event Counter mode

8-Ch Digital Output with DO and Pulse Output mode

Intelligent Conditions&Go (IF-Then) logic rules

Active events by logic rules or SNMP Trap

Support OPC Server Driver

Windows Utility, OPC Server Utility, Modbus/TCP
protocol, SNMP and Web management

Built-in watchdog timer and real-time clock

Din-Rail Mount with Robust Aluminum case and IP31
protection

System

CPU

16 bits/100MHZ, RISC-Based

SDRAM

32K bytes

Flash ROM

512K bytes

EEPROM

256 bytes

Watchdog Timer

1.0 sec H/W

LED

PWR: Power Input plugged and On (Green)

RDY: System startup ready (Red)

Network Interface

Ethernet

IEEE 802 .3 10Base-T

IEEE 802 .3u 100Base-TX

Connector

1* RJ-45, Auto MDI/MDI-X

Protection

Built-in 1.5 KV magnetic isolation protection

LED

Upper (LAN Activity): Orange On & Blinking

Lower(10M/100M): 10M (Green Off) /100M(Green ON)

Network Protocols:

IP, TCP, UDP, SNMP, HTTP, Telnet, BOOTP, DHCP, Modbus/TCP, OPC Server

Digital Input

Input Channels

14 channels

Input Type

source type

Input Mode

D/I or event counting with input frequency of 100 Hz max

DC Input

30V max

Threshold Voltage

Responding Time to Host PC Request

<2ms

Digital Output

Output Channels

8 channels

Output Type

SSR output, sink type

Output Mode

Level or pulse output with programmable pulse width

Working Range

5-40VDC

Driving Capacity

250mA max

Responding Time to Host PC Request

<2ms

Output Initial State

Programmable

Isolation Voltage

2500Vrms

Power Requirements

System Power

external unregulated +24V (18-32V)

Power Consumption

Max. 1.92W

Mechanical

Dimensions

120 (H) x 55 (W) x 75 (D)

Mounting

Din-Rail

Material

Aluminum

Environmental

Regulatory Approvals

CE, FCC Class A

Operating Temperature

-25 ~ 70°C

Operating Humidity

20 ~ 90% non-condensing

Storage Temperature

-40 ~ 80°C

Warranty

3 years

Feature

Configuration

Windows Utility, Web browser, SNMP, DHCP Client, TFTP Server for firmware update

Windows Utility

Block I/O Utility, Device Fider Utility

OPC Server Utility

OPC Server for Modbus/TCP

SNMP

MIB-II: System, SNMP Trap and Private MIB

SNMP Trap Server

Up to 4 SNMP Trap Server

Logic Condition&Go Rules

Conditions of the DI/Counter values, Actions include DO/Pulse, Counter and Trap

Program

C++ Example code by optional