Overview
Specifications
Ordering Information

Datasheet

Intelligent 4-CH Analog Output Ethernet I/O Server

Ethernet Block I/O with 4 Channel Analog Output

12 bit resolution and high accurary

Indepent output operation with 0-10V, ±10V, 0-20mA

Programable output slew rate

Support OPC Server Driver

Windows Utiltity, OPC Server Utility, Modbus/TCP
protocol, SNMP and Web management

Built-in watchdog timer and real-time clock

Din-Rail Mount with Robust Aluminum case and IP31
protection

System

CPU

16 bits/100MHZ, RISC-Based

SDRAM

32K bytes

Flash ROM

512K bytes

EEPROM

256 bytes

Watchdog Timer

1.0 sec H/W

LED

PWR: Power Input plugged and On (Green)

RDY: System startup ready (Red)

Network Interface

Ethernet

IEEE 802 .3 10Base-T

IEEE 802 .3u 100Base-TX

Connector

1* RJ-45, Auto MDI/MDI-X

Protection

Built-in 1.5 KV magnetic isolation protection

LED

Upper (LAN Activity): Orange On & Blinking

Lower(10M/100M): 10M (Green Off) /100M(Green ON)

Network Protocols:

IP, TCP, UDP, SNMP, HTTP, Telnet, BOOTP, DHCP, Modbus/TCP, OPC Server

Analog Output

Channels

4 Channels, Differential

Resolution

12 bits

Input Range

Voltage: 0-10V, ±10V
Current: ±20mA

Accuracy

±0.1% of FSR ±1LSB

Output Impedance

0.5

Current Load Resistor

0 to 500 (source)

Programmable Output Slope to Satefy Value

0.125 to 128 mA/sec (Current)

0.0625 to 64 V/sec (Voltage)

Calibration

On Board EEPROM

Isolation Voltage

2500Vrms

Power Requirements

System Power

external unregulated +24V

Power Consumption

Max. 3W

Mechanical

Dimensions

120 (H) x 55 (W) x 75 (D)

Mounting

Din-Rail

Material

Aluminum

Environmental

Regulatory Approvals

CE, FCC Class A

Operating Temperature

-25 ~ 70°C

Operating Humidity

20 ~ 90% non-condensing

Storage Temperature

-40 ~ 80°C

Warranty

3 years

Feature

Configuration

Windows Utility, Web browser, SNMP, DHCP Client, TFTP Server for firmware update

Windows Utility

Block I/O Utility, Device Fider Utility

OPC Server Utility

OPC Server for Modbus/TCP

SNMP

MIB-II: System, SNMP Trap and Private MIB

SNMP Trap Server

Up to 4 SNMP Trap Server

Logic I/O Rules

Conditions(IF) of the DI/Counter values,

Actions(Then) include DO/Pulse, Counter Reset and SNMP

Program

C++ Example code by optional