Overview
Specifications
Ordering Information

Datasheet

Industrial Managed Ethernet I/O Module

Din-Rail Mount Ethernet Block I/O modules

Complete solution with multiple channels Analog Input/Output, Digital Input/Output and temperature
measurement (Thermocouple, RTD) features

Support Industrial Modbus/TCP protocol

Built-in OPC Server for Modbus/TCP

Configurable by Windows Utilities, built-in Web browser, Telnet, SNMP and C++ example code

Smart user-defined rules for I/O messaging

Auto activate events by SNMP Trap

Built-in watchdog timer and real-time clock

Aluminum case with IP31 Protection

JetI/O 6500 series is a series of Managed Ethernet I/O modules for distributive monitoring and controls. The JeI/O 6500 series equipped with one Ethernet port and multiple channels Analog Input/Output, Digital Input/Output and temperature measurement connectors. Thus users can easily perform I/O data collecting, status changing, automatically activate events… through the Ethernet network.

Ethernet Based Managed I/O module

JetI/O 6500 series are the Standalone Ethernet based managed I/O modules. JetI/O 6500 series support Din-Rail vertically mount, users can easily install the JetI/O in the control box, construct the cables with limit space. JetI/O 6500 series support multiple channels Analog Input, Analog Output, Digital Input, Digital Output and Temperature measurement, like Thermal Couple Input and RTD Input. The RJ-45 Etherent port allows user to configure the settings, system maintainese, poll the information/status, monitor I/O status, program logic rules and alarm events over network.

HMI/SCADA Compatibility

JetI/O 6500 series support Modbus/TCP protocol, Modbus/TCP is the most commonly protocol in communicating between the industrial electronic devices over TCP/IP. Modbus/TCP uses binary encoding of data and TCP/IP’s error detection mechanism, allows for measuring temperature and humidity and communicating the result between the connected devices. JetI/O 6500 windows utility also provides OPC Server for Modbus/TCP, so that the HMI/SCADA system can easily integrate the JetI/O modules.

Ease Configuration & Maintaines

JetI/O 6500 siries provide several Windows based management utility, programming example files for Device and I/O interfaces' management. The I/O configuration utility allows user to discover the JetI/O in the same subnet, configure the I/O interface's setting, configure the alarm setting and SNMP Trap server, monitor I/O status. The Device Finder Utility allows user to upgrade firmware, view the device settings.
The built-in OPCServer for Modbus can help the HMI/SCADA system to poll the information of the JetI/O devices. Users also can use the example files, Modbus/TCP to program the I/O configuration/monitoring per specific purposes. In traditional, most of the I/O' information/status are not changed, the periodical polling data sometimes may affect the network performance. The intelligent alarm notification allows users to configure the rules for pre-defined alarms and assign the target IP of the SNMP Traps servers, then the JetI/O automatically update the changed info/status to the SNMP Trap manager. This is easy way for maintaines.

Dimensions (Unit -mm)